Arc Flash Wear
  1. Home
  2. ENESPRO PPE
  3. 100 CAL AR 18" Long Gloves

Move your mouse over image or click to enlarge

100 CAL Arc Rated 18" Long Gloves

Premium Multi-Hazard FR/AR Protection: Arc Flash, Flash Fire, Intense Heat

Enquire

ENESPRO® ARCGUARD® 100 CAL Arc Rated 18" Long Gloves

 

ENESPRO® ArcGuard® 100 CAL arc rated 18" Long Gloves offer superior protection by combining high arc flash resistance with extended forearm coverage, using multiple layers of inherently flame resistant DuPont™ Nomex® and Kevlar®. They provide crucial defence against intense heat and burns for electrical workers. These protective gloves have a 100 cal/cm2 arc rating (ATPV) and meet NFPA 70E (PPE CAT 4), NFPA 2112, ASTM F1506 and CSA Z462 standards. The multi-layered FR/AR materials are designed to absorb and dissipate the intense heat from an arc flash, preventing severe burns and ongoing injuries. 

HAZARD PROTECTION: Arc Flash, Flash Fire, Intense Heat and Flame.

The 18" Glove length provides protection for a significant portion of the forearm, which is crucial during potential arc flash events. Protecting the forearms is crucial because they are frequently the closest part of the body to the arc, leaving them highly exposed to the highest levels of thermal energy, molten metal spray and pressure.

About ENESPRO® PPE

▲ ENESPRO® ArcGuard® 100 CAL Arc Rated 18" Long Glove Forearm Protection

COLOUR: BROWN

SIZES: Universal - One Size Fits Most

ARC RATING: 100 cal/cm2 (Also available - 65 CAL AR 14" Long Gloves - see Thumbnail Image 6 and foot of page)

NFPA 70E PPE CAT 4

FABRIC: Multi-Layer DuPont™ Nomex® and Kevlar®

MANUFACTURED in the USA

This product is not voltage rated for protection against electric shock. 

  • Product Number: G51KDQE18
  • Wide bell cuff.
  • Inherently flame resistant for FR protection that will not wash out.
  • Lined with needle punched Dupont™ Nomex® felt.
  • Embroidered with Arc Rating.
  • PPE CAT 4.
  • ATPV 100 cal/cm2.
  • NFPA 70E for Arc Flash.
  • CSA Z462 for Arc Flash (Canada).
  • NFPA 2112.
  • ASTM F1506 for Arc Flash.
  • OSHA 1910.269.
  • Read the instructions on the garment label and launder as per the instructions on the garment label.
  • Machine wash on warm (maximum 149° F / 60° C). Use a mild detergent and tumble dry on a medium setting.
  • DO NOT: iron, use chlorine bleach, hydrogen peroxide, fabric softener or starch.
  • Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when the garment becomes soiled with dirt, grease and oils.
  • If contaminants cannot be removed after laundering, it is best to discontinue use of the garment. 

Also Available - ENESPRO® ArcGuard® 65 CAL Arc Rated 14" Long Gloves

  • Product Number: G51KDQE14.
  • ATPV 65 cal/cm2 PPE CAT 4.
  • Material: Multi-layer DuPont™ Nomex® and Kevlar®.
  • Inherently flame resistant for FR protection that will not wash out.
  • Embroidered with Arc Rating.
  • For Image Enlargement - hover over or enlarge Image 6 above (from L to R).
  • Compliance: Per ENESPRO® 100 CAL Arc Rated 18" Long Gloves.

This product is not voltage rated for protection against electric shock.

▲ ENESPRO® ArcGuard® 65 CAL Arc Rated 14" Long Glove Forearm Protection