- Product Number C07H3GCBG_ _30
- Lighter and more durable than traditional FR Cotton Jackets.
- Inherently Flame Resistant - Protection will not wash or wear out.
- Great for layering under primary aluminised protection.
- Exceptional tensile and tear strength.
- Moisture wicking and quick drying.
- Covered snap front closure.
- Inside left chest pocket.
- Snaps at wrist for adjustment.
- Colour - Dark Green.
- Sizes: SM - 3X, RG.
- MOQ - 5 units (across different sizes to reach MOQ).
Fabric Performance
NSA's Carbon Armour™ 8.6oz/291gsm OPF Blend Ripstop is an advanced, heavy-duty flame resistant and arc rated fabric designed for high-heat industrial tasks. It is engineered primarily for rugged applications such as welding, grinding and metal smelting or as a protective secondary layer under primary aluminised apparel.
The defining characteristic of the fabric is its ripstop weave. This cross-hatch reinforcement pattern prevents punctures and minor snags from tearing open making it the toughest and most tear resistant variant in the NSA Carbon Armour™ line-up.
Key Safety Ratings: Arc flash PPE CAT 2, 9.9 CAL (ATPV), extreme molten metal splash and spark defence, anti-static defence.
Permanent Features: Permanent/inherent protection, high durability, zero melting, lightweight comfort, moisture wicking and quick drying.
- Product Numbers
- NXJN4C_ _40 (40" / 102cms Length)
- NXJN4C_ _50 (50" / 127cms Length)
- Protection from sparks and molten metal splash hazards.
- Articulated elbows for freedom of movement.
- Ventilated action back for extended movement, comfort and airflow.
- Underarm gusset for added mobility.
- Contoured tail hem for extended lower back coverage.
- Snap front closure with leather pull tabs for ease of use with gloves.
- Colour - Navy.
- Sizes: SM - 3X, RG. Additional sizes available on request.
- MOQ - 5 units (across different sizes to reach MOQ).
Fabric Performance
National Safety Apparel's 9.5oz SafeGuard™ Coating Technology OPF Carbon Blend fabric is a cutting-edge material engineered to provide heavy-duty secondary protection in high heat industrial environments. This specialised fabric merges Oxidised Polyacrylonitrile Fibres (OPF) with high-strength carbon filaments, yielding an inherently flame resistant textile that will not wash or wear over time. By utilising a SafeGuard™ coating, the material forms an exceptionally resilient thermal barrier that maintains its dimensional stability and resists cracking even when exposed to severe thermal shocks.
The fabric focuses heavily on minimising worker fatigue through a lightweight and heavily ergonomic design. The OPF Carbon blend material offers a surprisingly soft and flexible alternative that optimises situational mobility. The fabric integrates functional design like quick-drying technology and high tensile strength to ensure maximum durability on the job. This balance of heavy-duty safety and breathable wearability ensures that mechanics, welders and foundry workers remain well protected without sacrificing daily physical comfort.
Size Chart - Body Measurements |
SIZE | CHEST (INCHES) | WAIST (INCHES) | SLEEVE LENGTH (INCHES) |
SM | 32 - 35 | 30 - 33 | 35.0 |
MD | 36 - 39 | 34 - 37 | 36.0 |
LG | 40 - 43 | 38 - 41 | 36.5 |
XL | 44 - 48 | 42 - 46 | 37.0 |
2X | 49 - 53 | 47 - 51 | 37.5 |
3X | 54 - 58 | 52 - 56 | 38.0 |
- CHEST: Stand up straight with your arms relaxed at your sides. Have an assistant measure around the fullest part of your chest, under your arms and across your shoulder blades, ensuring the tape is level.
- WAIST: Measure around your natural waist, where your waist bends side to side. NOTE: This may not be the smallest point.
- SLEEVE LENGTH: Measure from the centre back of your neck, across your shoulder down to the wrist bone.
- NOTE: Measurements are body measurements to help determine what size garment should be ordered. For best results, measure over fitted undergarments. If your measurement falls between sizes, it is recommended that the larger size be purchased.
- Body measurements are in inches. To convert centimetre measurements to inches, divide your centimetre measurements by 2.54 and select the corresponding inch measurements from the chart.
- Product Number SPXHPCA0208_ _ _ _
- Lighter and more durable than traditional FR Cotton solutions.
- Inherently Flame Resistant - Protection will not wash or wear out.
- Exceptional tensile and tear strength.
- Excellent comfort and durable protection.
- Two chest pockets with flaps and snap closure.
- Action back for increased movement.
- Inset elastic waistband.
- Covered FR zip front closure.
- Colour - Dark Green.
- Sizes: MD - 3X, RG.
- MOQ - 5 units (across different sizes to reach MOQ).
Fabric Performance
NSA's Carbon Armour™ 6.4oz/216gsm OPF Blend Twill is a premium, lightweight flame resistant and arc rated woven fabric. It is designed for tough industrial environments such as welding shops, utilities and foundries. Unlike stretchable knit fabrics for undergarment, this 6.4oz twill is a structural woven fabric. It is used for secondary protective layers such as NSA Jackets, Coveralls and Welding Sleeves.
Key Safety Ratings: Arc flash PPE CAT 2, 9.0 CAL (ATPV), molten metal splash and and spark defence, anti-static defence.
Permanent Features: Permanent/inherent protection, high durability, zero melting and lightweight comfort.
- Read the garment label and launder per instructions on garment label.
- DO NOT use bleach, chlorine, hydrogen peroxide or fabric softeners.
- Turn garment inside out prior to laundering. Machine wash cold with like colours (maximum 40ºC / 105ºF). Tumble dry low (maximum. 60ºC / 140ºF).
- Wash according to the instructions above to remove any contaminants in order to maintain fabric performance when garment becomes soiled with dirt, greases or oils.
- If contaminants cannot be removed after laundering, it is best to discontinue use of garment.